Tuffy Security Speaker and Large Lock Box Set

With the Security Speaker and Large Lock Box Set that is brought to you by the minds at Tuffy Security you will finally be able to turn all of that unused space on the top of your wheel wells into a secure and convenient place where you can mount speakers up to 6 inches by 9 inches as well as lock up all of your valuables.  This box has been forged from 16 gauge steel and the set comes with a partition that is used to divide the storage area from the speaker and this partition can be removed.  There are padded arm rest cushions available that are sold separately.

Features at a Glance

·         Tuffy Security makes their Security Speaker and Large Lock Box Set with pride right here in the USA

·         This set does come to you complete with a warranty that is quite comprehensive

·         Tuffy utilized their proprietary locking system with this set and they have further enhanced it with a lid that is hemmed as well as a double bitted 10 tumbler key

·         This set is meant to fit between your roll bars in your Jeep and the boxes have not been cut out for the roll bar

·         This set in sold in pairs

·         The box is made to fit 6 inch by 9 inch speakers and these speakers are not included

·         The entire thing has been given a textured powder coat finish to make it resistant to corrosion

·         All of the hardware that is necessary for installation is included and it is all grade 8

Padded Cushion Set

This is the set of padded arm rest cushions that is optional for the Speaker and Large Lock Box Set that was just highlighted.  It is basically just a set of arm rest cushions that go on the boxes.

·         Tuffy Security makes these arm rest cushions with pride right here in the USA

·         These cushions come with a warranty that is quite comprehensive

·         All of the hardware that is necessary for the installation of these cushions is included

·         They are sold in sets of two

·         The inner material in these cushions is a foam that as a medium firmness

·         The wooden base is exterior grade

·         All of the edges are sewn

·         The outer material is vinyl that is of a marine grade

Tuffy Security is known for making high quality security products for your Jeeps and trucks.  They are also the manufacturers of some lighter accessories that are just as high quality as their security products.  The items that are described on this page are a good example of that.  Take a peek and see what else they have to offer you!

Tuffy Security Full Length Underseat Drawer

This drawer is really a space saver that uses the entire floor of your Jeep from under the front edge of the rear seat that was installed by the factory all the way back to your tail gate.  This is a drawer that is super secure and has been made from 16 gauge steel.  It gives you a safe place to store your valuables while retaining your rear seat that was installed by the factory.  In order to install this drawer, you will need the mounting kit.

The full length under seat locking drawer that is brought to you by the minds at Tuffy Security has been made from sturdy steel that is 16 gauge.  It has been given a powder coat in black to give it more resistance to corrosion.  This drawer gives you a full 2,530 cubic inches of space for storage.  It will fit in the Wrangler YJ model years 1987 – 1995 and the Wrangler TJ model years 1997 – 2006.

When it comes to installation, you will need to remove the rear seat in order to bolt this locking drawer right to the floor of your Jeep.  Drilling will be necessary for the Jeep YJ.  Once you have bolted the drawer to the floor, mount the rear seat right on top of it.  You will need a mounting kit for installation and it is sold separately.  Your rear seat will still have the full fold and tumble functionality once you have installed the drawer and you will still be able to mount rear storage boxes behind it.  You can lock this drawer if you like or just close the latch that keeps it from coming pen when you are driving. 

Features at a Glance

·         Tuffy makes this drawer with pride right here in the USA

·         This under sat drawer comes to you complete with a warranty that is quite comprehensive

·         The design of this drawer is a space saving one that is fully enclosed

·         Your rear seat will retain full fold and tumble functionality after the drawer has been installed

·         The locking system used is the Tuffy patented Pry Guard II.  This has a double butted 10 tumbler security key that has weather seals built in

·         There is also an Anti-Twist lock system that utilizes a push button

·         The ¼ inch steel latch allows for you to close and secure the drawer shut without locking it

·         This drawer pulls out to the full length

·         You will gain 2530 cubic inches to use for storage space with this drawer

·         Tuffy finished  this drawer with a powder coat in black to make it look great as well as to make it more resistant to corrosion

Tuffy Security 2015 Wrangler Security Deck Enclosure

This product brought to us by the minds at Tuffy is a security deck enclosure.  It creates a storage area that is both large and lockable and is completely protected on each side.  This unique design means that the security deck can be locked by the rear door of your Jeep.  When you close and lock the rear door, the enclosure is then locked up tight. 

The lid of the security deck is hinged to open easily and when it is shut it is secured by the use of a latching system that is quite innovative.  You can remove both the front and the lid with ease and even without any tools when you need to carry larger items.  The lid has a unique design and is made from a structural type of steel that has been welded.  It also has a large tray that is weight bearing that you can use for transporting or organizing cargo on the top of it.  In addition, there are also a couple of good sized trays on the sides right over the wheel well that allow for additional storage and organizational space.

This entire security deck is created from welded steel that is 16 gauge.  It also features fasteners that are heavy duty and the entire thing has been given a durable powder coat that is textured.

This security deck enclosure made by Tuffy will work just as well in vehicles that don’t have a subwoofer as it does in those that do.  It functions in tandem with the OE cover for the compartment or you may choose to get the Cubby Cover (also made by Tuffy).  Each one of the trays in the enclosure has had drain holes drilled into them so that there will not be any sort of moisture puddling in them.  This enclosure can be easily mounted and there is no drilling necessary whether you are mounting this in a 2 door Jeep or a 4 door Jeep.  It also works well with both soft tops and hard tops.

Features at a Glance

·         There are a pair of trays for organization or storage over each of the wheel wells

·         This enclosure will work well with either the Cubby Cover or your OE storage cover

·         The security deck enclosure works well in vehicles with a subwoofer as well as without a subwoofer

·         Weather seals are included

·         Each one of the trays has been given a drain hole to prevent moisture from collecting in them

·         Works well with both soft tops and hard tops

·         The lid is weight bearing and can be used as a tray for storage

·         You can remove both the front and the lid without even using tools

Single Compartment Overhead Security Console

The Overhead Security Console that is made by Tuffy Security comes in two different versions.  The one that we are talking about now is meat for use with the Jeep Wrangler JK.  This console is equipped with a compartment that is lockable.   This compartment can be used to house a speaker, CB radio, stereo or any other type of electrical device.  The door of this compartment swings flush and the latches open.  In order to secure the door shut, Tuffy Security has given it a 10 tumbler lock that is double bitted and this lock also has weather seals that have been integrated into it.  There is also a stereo mounting bracket that is the bolt in type.  This is for easy installation of a CB radio or a stereo of the DIN mount type.  The design of the console is an innovative one and it slides in order to allow for access to the levers that you will use to remove the top of the Jeep.

For proper mounting, the overhead security console will mount right to the factory installed holes which means that there is no need for you to drill anything.  The console is able to be expanded to fit between your roll bar and your windshield.

Features at a Glance

·         The single compartment overhead security console that is made by Tuffy Security has been given a powder coat finish that has a durable texture

·         The single compartment overhead security console that is brought to you by the minds at Tuffy Security has speakers cutouts that are 4 inches yet can hold a 5 ¼ inch speaker

·         The Tuffy Security designed single compartment overhead security console is equipped with a single door that swings away

·         The single compartment overhead security console that is made by Tuffy Security has been given a convenient latch.  This latch is used to hold the door open when you need it to be held open

·         The single compartment overhead security console that is brought to you by the minds at Tuffy Security has a hole that has been pre-punched into it.  This hole is meant for a CB mic

·         The Tuffy Security designed single compartment overhead security console features a 10 tumbler lock that is double bitted and this lock also has weather seals that have been integrated into it

The compartment is made from heavy duty steel that is 16 gauge.  It features a single compartment that is lockable and can be used to hold electronic devices such as a speaker, CB radio, stereo and more.  This is a great way to store your electronics in a secure fashion while keeping your dash space uncluttered.

Tuffy Security: Series II Security Console

The Series II security Console is one of the great products that are brought to you by Tuffy Security.  This console measures 10 inches in width and has a compartment that is very spacious that you can use to mount a CD changer or just to store things like cell phones, electronic equipment, tools or any other sort of valuables.  This console has been constructed from 16 gauge steel that is very heavy duty and features a latch system that is the push button type and this system is patented by Tuffy Security.  For your convenience as well as your safety, when you happen to have the compartment open while you are driving, you are also able to shut it and the latches will engage by themselves without you needing to fumble about trying to lock them while your attention should be on the road.  When you purchase this console, you will also get a floor mat made from rubber.  There are also some other accessories that are available for this console that are each sold separately.  

Mounting this console does require a bit of drilling but it is minimal and installation is easy.

Features at a Glance

·         The Security Console known as the Series II that is made by Tuffy Security features a tray that is removable

·         The Security Console known as the Series II that is brought to you by the minds at Tuffy Security comes to you complete with a rubber floor mat

·         The Tuffy Security designed Security Console known as the Series II  has a striker that is made from ½ inch solid steel and has 2 points that are welded

·         The Security Console known as the Series II that is made by Tuffy Security includes a storage tray that is quite convenient

·         The Security Console known as the Series II that is brought to you by the minds at Tuffy Security has drink holders that are oversized.  These drink holders are equipped with rubber fingers so that the drinks will no rattle

·         The Tuffy Security designed Security Console known as the Series II comes to you with all of the hardware that is necessary for a safe and proper installation.  This hardware is Grade 8

·         The Security Console known as the Series II that is made by Tuffy Security has been given a powder coat finish that has a durable texture

·         The Security Console known as the Series II that is brought to you by the minds at Tuffy Security is equipped with seat belt straps that are made from polypropylene

·         The Tuffy Security designed Security Console known as the Series II has added more security to the design with the hinge design that is of the pin lock type

 

Tuffy Security: Security Glove Box

It doesn’t matter if you happen to be out on the trails for the weekend or if you are stuck in the city, you might have a need to protect your valuables in your Jeep.  TuffySecurity offers you a whole line of products that will allow you to accomplish that but for now we will go over the Security Glove Box that is made by Tuffy Security.  The Rec line of products that are made by Tuffy Security have been made specifically to offer solutions to the everyday problems of theft that can occur whether you are at the mall, off road or even when your Jeep is parked in the parking garage at work.  This is professional gear that has been engineered specifically to give you the security solutions that you need.  In fact, this line of products is used today by construction crews, fleet vehicles, heavy equipment, oil field personnel, the US Military, SAR, law enforcement and even by normal everyday people. 

The Security Glove Box is made from steel that is 16 gauge and heavy duty.  This is a high security type of glove box that is the ideal way to replace your plastic or even in some cases cardboard glove box that was installed by the factory.  This glove box is the ideal solution for storing all sorts of smaller items securely.  The latch system that is used for this glove box is one that has been patented by Tuffy Security and this latch system allows for the glove box to be shut and latched without you needing to lock it and unlock it every single time that you need to gain access to it.  

Features at a Glance

·         The Security Glove Box that is made by Tuffy Security includes a lever that is of the finger pull type

·         The Security Glove Box that is brought to you by the minds at Tuffy Security has been given a powder coat finish that is durable and textured

·         The Tuffy Security designed Security Glove Box allows for you to retain and re-use your grab handle that was installed by the factory

·         The Security Glove Box that is made by Tuffy Security has a patented lock system that is of the push button, anti-twist type.  This system utilizes a security key that is double bitted and has 10 tumblers and also has integrated weather seals

·         The Security Glove Box that is brought to you by the minds at Tuffy Security utilizes the locking system that was patented by Tuffy Security.  This locking system is called Pry-Guard II.  It features a steel latch that is ¼ inch thick and it also enables you to close and latch the door of the glove box without actually locking it

 

Tuffy Security: Security Console

The Security console that is made by Tuffy Security is meant for use with the Jeep Wrangler JK.  This console will give you nearly twice the amount of storage that is secure when compared to the console that was installed by the factory.  There is a special bracket that has been included that is meant to be used to mount a CB radio, stereo or some other type of electronic equipment.  This is located on the inside of this lockable console and there is also a pre-drilled hole that has been included that is meant to be used for the mic of a CB radio.  On the inside of the storage area you will find a 12 power outlet that is marine grade as well as a utility tray that is able to be removed.  The ¼ inch thick latching system is called the Pry-Guard II and has been patented by Tuffy Security.  This latching system will ensure that the lid is shut securely and remains so until you open it.  When the lid is opened it will be supported by a gas strut.  The console is made from 16 gauge steel and is a full console.  It gives you more than twice the amount of storage space that is secure than that which is provided by the factory installed console. 

Included in this console are drink holders for both the front and the back.  These drink holders have been outfitted with rubber fingers that will keep the drink from rattling around.  This console is taller than the console that was installed by the factory and it features a padded armrest that is full length and quite comfortable.

This console has been designed to be able to work with Jeeps that have power switches for the rear windows as well as with Jeeps that are not equipped like this.  Each of these consoles also includes brackets for manual transmissions as well as automatic transmissions.  There has also been a divider included in order to allow for more storage when you are not using the brackets for the electronics.

Features at a Glance

·         The Security Console that is made by Tuffy Security has been finished with a powder coat that is durable and textured

·         The Security Console that is brought to you by the minds at Tuffy Security comes to you complete with all of the hardware that is necessary for a safe and proper installation.  All of this installation hardware is Grade 8

·         The Tuffy Security designed Security Console features sturdy mounting surfaces for auxiliary switches

·         The Security Console that is made by Tuffy Security features a gas strut that supports the lid when it is open